Views: 40 Author: Site Editor Publish Time: 2021-10-25 Origin: Site
1. Type-C female 16Pin TID, has been certified by the USB-IF Association, TID No.255. Its characteristics are as follows:
① Three injection molding process;
② Shell shrapnel design;
③ Using high-performance conductive materials, 5A current can pass;
④ Plug and unplug 10,000 times;
⑤ Fully automatic assembly, appearance CCD inspection process.
2. Type-C female 16Pin, its characteristics are as follows: ① The bump design prevents loosening;
② Three injection molding process;
③ The built-in steel sheet is wear-resistant and the tongue is not easy to break;
④ Appearance color can be customized.
3. Type-C female connector 6Pin, its characteristics are as follows:
① Simplified version, with cost advantage;
② Pin definitions: VBUS, CC1/CC2, GND, which meet the requirements of charging and discharging;
③ Shell shrapnel design;
④ Used in mobile power, electronic cigarette, TWS headset charging compartment, etc.
4. Type-C female 16Pin sinking plate 0.8/1.0/1.6 series, its characteristics are as follows:
①Easy to design ultra-thin structure products;
② Three injection molding process;
③ Mainly used in wireless charging, car charging, etc.
5. Type-C female 14Pin vertical type, its characteristics are as follows:
① Harpoon product design;
② Three injection molding process;
③ Mainly used in car chargers, multi-port sockets, outdoor mobile energy storage, etc.
6. The 16Pin of Type-C female seat is increased by 5.9mm, and its characteristics are as follows:
① The product can be designed in the middle of the shell structure;
② The shielding shell adopts spot welding reinforcement method, and the structure is stable;
③ The built-in steel sheet is wear-resistant and the tongue is not easy to break.
7. USB-A side plug 5Pin female connector, its characteristics are as follows:
① With signal detection function, save product space and BOM cost;
② The color of the rubber core can be customized.
8. TYPE-C female connector 24pin full-function product, its features are as follows:
① Comply with USB3.1 GEN1 standard, 5A high current, 10,000 plug-and-pull times;
② One-piece structure, built-in steel sheet, three injections;
③ Fully automatic assembly, appearance CCD inspection process.
